WebColour - Web Based LED Control
User Manual
7.0 - 23 November 2020
Page 9 of 25
+617 3899 1267
RGB Dimmer
This dimmer is only visible when the unit is running in RGBW mode. It allows the user to dim the red, green
and blue channels separate to the white channel from 0-100% (in 10% steps). Note that the colour of the
slider on this dimmer changes colour to match the selected static colour
To set a level, either click at the desired point on the bar, or click and drag the slider.
White Dimmer
This dimmer is only visible when the unit is running in RGBW mode. It sets the level of the white channel
from 0
–
100% (in 10% steps).
To set a level, either click at the desired point on the bar, or click and drag the slider.
Favourites
Favourites are used for setting shows for alarms and power
up, or simply for quick access to a liked setup.
Loading
To load a favourite:
1.
Click on the favourites button
2.
Select the favourite you wish to load from the drop
down box. This will display the levels of the
favourite.
3.
Press the load button. The selected favourite will
load immediately.
Saving
To save over a favourite:
1.
Configure the output of the WebColour to the
desired settings.
2.
Click on the favourites button
3.
Select the favourite you wish to save over from the
drop-down box. This will display the current levels of the favourite.
4.
Enter a new name for the favourite.
5.
Press the save button to save over the favourite with the new settings. The settings being
displayed will change to match
Figure 6. Favourites page
