WebColour - Web Based LED Control
User Manual
7.0 - 23 November 2020
Page 10 of 25
+617 3899 1267
Configuration
Alarms
Set an Alarm
1.
Bring up the Alarms Configuration Page.
2.
Select the alarm you want to configure from the
drop-down box.
3.
Select the days on which the alarm is to occur. If no
days are selected, the alarm is disabled.
4.
Set the time the alarm is to occur.
5.
Select the action to occur when the alarm is
triggered. Possible actions are:
a.
Turn LEDs off;
b.
Turn LEDs on (with last settings); or
c.
Turn LEDs on, load favourite 1- 10.
6.
Press the set alarm button to save these settings.
Disable an Alarm
1.
Bring up the Alarms Configuration Page.
2.
Select the alarm you want to disable from the drop-
down box
3.
Deselect all days.
4.
Press the set alarm button to save these settings.
Figure 7. Alarm Configuration page