Digigram VX881e, Руководство пользователя

Страница: 16 / 34

Removing
​ ​
the
​ ​
driver
​ ​
under
​ ​
Windows
​ ​
XP
and
​ ​
Windows
​ ​
Server
​ ​
2003
● Open the ​ Windows Control Panel and double-click on the
Add/Remove ​ ​ Software ​​ ​ icon.
● Select
​ ​​
“
​
Digigram
​ ​
HR
​ ​
Runtime
​ ​
…”
​
,
​ ​
and
​ ​​
Change/Remove
​
.
● Select
​ ​​
Remove
​​ ​
in
​ ​
the
​ ​
np
​ ​
Runtime
​ ​
window.
● Follow ​ ​ the ​ ​ instructions ​ ​ to ​ ​ finish ​ ​ to ​ ​ remove ​ ​ the ​ ​ driver.
Removing
​ ​
the
​ ​
driver
​ ​
under
​ ​
other
​ ​
Windows
​ ​
versions
● Open the ​ Windows Control Panel and double-click on the
Programs
​ ​
and
​ ​
Features
​​ ​
icon.
● Select ​ “ ​ Digigram HR Runtime for Vista…” ​ , and
Change/Remove ​ .
● Select ​ ​​ Remove ​​ ​ in ​ ​ the ​ ​ HR ​ ​ Runtime ​ ​ window.
● Follow
​ ​
the
​ ​
instructions
​ ​
to
​ ​
finish
​ ​
removing
​ ​
the
​ ​
driver.
How
​ ​
to
​ ​
check
​ ​
the
​ ​
installation
Once ​ ​ the ​ ​ cards ​ ​ and ​ ​ the ​ ​ driver ​ ​ have ​ ​ been ​ ​ installed ​ ​ according ​ ​ to ​ ​ the
procedure ​ ​ described ​ ​ in ​ ​ this ​ ​ manual, ​ ​ you ​ ​ can ​ ​ verify ​ ​ that ​ ​ the ​ ​ card ​ ​ is
properly ​ ​ installed ​ ​ and ​ ​ works ​ ​ fine ​ ​ as ​ ​ follows:
● Menu
​
<Start> <Settings> <Control panel>
​
, <Sound and
Multimedia> ​ , tab ​ “Audio” ​ , ​ Default device (Playback device,
Recording device). The card’s channels can be selected. The
card ​ ​ can ​ ​ be ​ ​ used ​ ​ with ​ ​ any ​ ​​ DirectSound
​​
​ application.
Available ​ ​ WDM ​ ​ recording ​ ​ and ​ ​ playback ​ ​ devices ​ ​ are:
● VX881e ​ ​ (VX882e) ​ ​ 1+2 ​ ​ (WDM) ​ ​ ( ​ record
​ ​
and
​ ​
playback
​
)
● VX881e
​ ​
(VX882e)
​ ​
3+4
​ ​
(WDM)
​ ​
(
​
record
​ ​
and
​ ​
playback
​
)
● VX881e ​ ​ (VX882e) ​ ​ 5+6 ​ ​ (WDM) ​ ​ ( ​ record ​ ​ and ​ ​ playback ​ )
● VX881e ​ ​ (VX882e) ​ ​ 7+8 ​ ​ (WDM) ​ ​ ( ​ record ​ ​ and ​ ​ playback)
● VX881e ​ ​ (VX882e) ​ ​ 5.1 ​ ​ (WDM) ​ ​ ( ​ record
​ ​
and
​ ​
playback
​
)
● VX881e
​ ​
(VX882e)
​ ​
7.1
​ ​
(WDM)
​ ​
(
​
record
​ ​
and
​ ​
playback
​
)
● The card is also visible via the np interface: go to ​ <Start>
<Programs> <Digigram> and select
​
<Digigram Control
Center> ​ .
● In ​ ​ the ​​ ​ “Digigram ​ ​ drivers” ​​ ​ window, ​ ​ select ​ ​ the ​ ​ ‘ ​ General
Information’ ​​ ​ tab.
In
​ ​
the
​ ​​
“Modules
​ ​
Information”
​​ ​
window,
​ ​
you
​ ​
can
​ ​
see
​ ​
the
16