DigiDesign VENUE Personal Q Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 24

DigiDesign VENUE Personal Q Скачать руководство пользователя страница 6

VENUE Personal Q Guide

2

Operational Requirements

Temperature and Ventilation

VENUE system components should be operated away from
heat sources and with adequate ventilation.

Storage

VENUE system components should be stored and transported
at temperatures not lower than 0 degrees F (–18 degrees C)
and not exceeding 140 degrees F (60 degrees C).

Operation

VENUE system components should be operated at tempera-
tures not lower than 40 degrees F (4 degrees C) and not ex-
ceeding 115 degrees F (46 degrees C).

Water and Moisture

VENUE system components should be operated away from
sources of direct moisture and should be kept clear of liquids
that might spill into the units.

If condensation is present on a VENUE system component,
leave the unit to dry in ambient air for at least one hour before
powering the unit on.

Cleaning and Maintenance

If you need to clean the surface of a VENUE system compo-
nent, use a dry cloth. Do not apply any cleaning solutions,
spray cleaners, or abrasives to the surface.

Connection Requirements

Power Connections

PQ Rack

Each PQ Rack requires its own power connection.

Make sure your power source is correctly rated for the number
of units you are connecting. A surge protected power source
(not included) is highly recommended.

PQ Controllers

Each PQ Controller is powered by the PQ Rack

through its PQ Controller cable connection.

«
...
4
5
6
7
8
...
»

Содержание VENUE Personal Q

























Отзывы:

Нет отзывов