DigiDesign RM1, Руководство пользователя

Страница: 20 / 32

Digidesign RM1 and RM2 Guide 14
Setting HF
Adjustment of the HF level can counteract the
effects of high frequency variation that may be
created by source equipment or room acoustics.
The range of adjustment is –4 dB to +3 dB in
0.5 dB steps.
To adjust HF:
„
Rotate the HF encoder until it indicates the
desired setting.
For more information on the HF setting, see
“Reference Diagrams” on page 20.
Setting LF
The LF adjustment lets you compensate for the
effects of boundaries. If the monitor is placed
near a wall, ceiling or floor it may increase the
perceived quantity of low frequency energy. If
so, it may be necessary to reduce the LF level
coming from each monitor. If in a large or free-
standing environment, the LF level can be in-
creased. The amount of adjustment required
varies depending on room acoustics and per-
sonal preference.
The range of adjustment is –4 dB to +3 dB in
0.5 dB steps.
To adjust LF:
„
Rotate the LF encoder until it indicates the de-
sired setting.
For more information on the LF setting, see
“Reference Diagrams” on page 20.
HF shelving (RM1 and RM2)
HF control and markings (current setting is 0)
LF shelving
LF control and markings