manualshive.com logo in svg

DigiDesign Pro Tools, Справочное руководство

Поделиться
Скачать
DigiDesign Pro Tools Скачать руководство пользователя страница 708

Pro Tools Reference Guide

694

AutoJoin Indicator

After a Latch automation pass with AutoJoin en-
abled, the AutoJoin indicator appears in the 
Pro Tools Edit window.

The AutoJoin indicator is a vertical line that sig-
nifies the point where the last automation pass 
was stopped, and the point where the “join” will 
automatically occur on all tracks that were writ-
ing during that previous pass. When automa-
tion writing is resumed from this point, the line 
disappears.

Touch/Latch Mode

(Pro Tools HD Only)

Touch/Latch Automation mode places a track’s 
Volume control in Touch mode and all other 
automatable controls in Latch mode. 

In Touch/Latch mode, the Volume control fol-
lows Touch behavior, writing automation when 
touched and returning to previously written lev-
els when released. 

All other controls follow Latch behavior, writing 
automation when touched and continuing until 
playback stops, or until you punch out of writ-
ing automation.

Trim Mode

(Pro Tools HD Only)

Pro Tools HD can adjust (or 

trim

) existing track 

volume and send level automation data in real 
time. Pan, mute and plug-in automation cannot 
be trimmed in this manner. Trim mode works in 
combination with the other Automation modes 
(Read, Touch, Latch, Touch/Latch, and Write) 
and is useful when you want to preserve all of 
your volume automation moves, but need to 
make levels a bit louder or softer to balance a 
mix. 

When writing automation in Trim mode, fader 
moves write 

relative

 rather than 

absolute

 values. 

The existing automation data is changed by the 
amount of increase or decrease (or the 

delta

 

value) indicated by the faders. 

When Trim mode is enabled, non-trimmable 
controls behave in the same manner as in the 
standard Automation modes, with the excep-
tion of Write/Trim mode, where non-trimmable 
controls operate as in Touch mode.

AutoJoin indicator in the Edit window

To use Join or AutoJoin to resume writing 
on controls that were writing when the 
transport stopped, restart the transport be-
fore the AutoJoin indicator.

AutoJoin indicator

Selecting Touch/Latch mode

Содержание Pro Tools























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды