DigiDesign Pro Tools, Справочное руководство

Страница: 647 / 886

Chapter 28: Basic Mixing 633
Assigning Groups to VCA Masters
An existing Mix group can be assigned to a VCA
Master, or a new Mix group can be assigned to a
VCA Master while it is being created. Only one
group can be assigned to a VCA Master at a time.
A VCA Master cannot control a group that in-
cludes itself.
To assign an existing group to a VCA Master:
■
Click the Group Assignment selector on the
VCA Master track and choose an available group
from the pop-up menu.
To assign a new group to a VCA Master:
1
While creating a new group, select Mix or
Mix/Edit as the Group type.
2
In the Group dialog, choose an available VCA
Master track from the VCA pop-up menu.
Track Membership in Multiple VCA Groups
It is possible for a single slave track to be a mem-
ber of more than one VCA-controlled group. In
this case, the contribution of all VCA Master
Volume faders is summed on the slave track.
Mute, Solo, Record Enable, and TrackInput fol-
low the same rules for enabling or disabling
slave tracks.
Inserts
Pro Tools lets you insert up to five inserts on
each audio, Auxiliary Input, Master Fader, or In-
strument track. Each insert can be either a soft-
ware
plug-in insert or a hardware insert , or an in-
strument plug-in .
Inserts provide the following features:
• Plug-ins and hardware inserts route the signal
from the track through the effect of your
choice, and automatically return it to the
same track.
• Hardware inserts send and return the signal to
corresponding input and output channels of
an audio interface, which can be connected to
outboard effects.
• Some Instrument plug-ins (such as Virus In-
digo) accept audio from the track input (let-
ting you use them as processing plug-ins.
• Inserts on audio, Auxiliary Input, and Instru-
ment tracks are pre-fader.
• Inserts on Master Faders are post-fader.
• Inserts can be bypassed or made inactive.
• Most plug-in controls are fully automatable.
Track Output Format and Plug-ins
Pro Tools supports mono, multi-mono, stereo,
and multichannel plug-ins (Pro Tools HD with
Surround Mixer only).
Because inserts process in series, changing the
plug-in format can alter the channel format. For
example, inserting a mono-to-stereo plug-in on
a mono Auxiliary Input changes the signal path
from that plug-in through the rest of the track.
Assigning an existing group to a VCA Master
Assigning a new group to a VCA Master
See Chapter 29, “Plug-in and Hardware In-
serts” for details about using plug-ins and
inserts.