DigiDesign Pro Tools, Справочное руководство

Страница: 476 / 886

Pro Tools Reference Guide 462
2
Choose Region > Loop. The Region Looping
dialog opens.
3
Do one of the following:
• Select the Number of Loops option and en-
ter the number of times to loop the region.
• Select the Loop Length option and enter
the duration according to the main time-
base. If the duration is not an exact multi-
ple of the source loop’s duration, the last
loop iteration will be truncated.
• Select the Loop Until End of Session or
Next Region option. The looped region will
be repeated until the end of the session, or
until the next region on the track. If neces-
sary, the last loop iteration will be trun-
cated to fit.
4
If desired, select the Enable Crossfade option.
This will create a crossfade at the loop point. To
edit the loop crossfade, do the following:
• Click the Settings button.
• Configure the Loop Crossfades.
• Click OK.
5
In the Region Looping dialog, click OK.
To rename the looped region name only (or the
region name and disk file name):
1
Double-click the loop icon with the Grabber.
2
Type in a new name.
3
Choose to name region name only, or rename
region name and disk file name.
4
Click OK.
Region Looping dialog
Loop Crossfade dialog
For information on working with crossfades
in Pro Tools, see Chapter 21, “Fades and
Crossfades.”