DigiDesign Pro Tools, Справочное руководство

Страница: 314 / 886

Pro Tools Reference Guide 300
3
Select the option for Program Changes. Leave
all other messages deselected.
4
Click OK.
When using the All Except option, the selected
types of MIDI messages are not recorded. Con-
versely, when using the Only option, only the
selected types of MIDI messages are recorded.
Input Quantize
When Input Quantize is enabled, all recorded
MIDI notes are quantized automatically. Input
Quantize is often useful for achieving rhythmi-
cally precise MIDI recordings. However, to pre-
serve all of the original nuance of your recorded
MIDI tracks (such as
rubato phrasing), disable
this option.
Wait for Note
The Wait for Note button, located in the Trans-
port window, determines how Pro Tools begins
recording. When enabled, Pro Tools does not
start recording until a MIDI event is received.
This ensures that recording begins only when
you start playing, and that the first note, or
other MIDI data, is recorded precisely at the be-
ginning of the record range (start time).
Wait for Note can be used when recording nor-
mally, when punching in, or when loop record-
ing. If pre-roll is enabled, it occurs after the
MIDI event is received and before recording be-
gins.
To enable Wait for Note:
1
To view the MIDI controls in the Transport
window, select View > Transport > MIDI Con-
trols.
MIDI Input Filter dialog
For more information on Input Quantize,
see “Input Quantize” on page 604.
Wait for Note and Countoff are mutually
exclusive and cannot both be enabled at the
same time. If, for instance, Countoff is en-
abled and you click the Wait for Note but-
ton, Countoff is disabled.
Transport window with MIDI Controls