DigiDesign Mbox 2 Academic, Руководство по началу работы

Страница: 48 / 98

42 Mbox 2 Academic Getting Started Guide
selector
Input 1 Gain
(level) control
DI
LED
Connecting Electric Guitar or Bass
To use a guitar with Mbox 2 Academic:
1
On the back of the Mbox 2 Academic, plug
your guitar cable into one of the DI inputs.
Input 1 DI
When you record a guitar (or any mono in-
strument that uses only one source input),
you will hear the sound in only one side of
the stereo field. Pushing the “mono” button
on the front of the Mbox 2 Academic brings
the sound from one side of the stereo field to
both sides. The Mono switch does not affect
the audio being recorded. It only affects how
you hear your input to the Mbox 2 Aca-
demic.
Connecting guitar to the Input 1 DI connector
2
On the front of the Mbox 2 Academic, set the
Source to DI by pressing the Mic/DI switch until
the DI LED is lit.
Connecting Keyboards and Mixers
To use a keyboard or mixer with Mbox 2
Academic:
1
Plug your keyboard, mixer, or other audio
source into either the Input 1 or Input 2 Line
Mix control Mic/DI (TRS) inputs on your Mbox 2 Academic. If your
source is stereo (such as a stereo keyboard or the
stereo output from a mixer), connect the left
channel (often the white plug) to Input 1, and
right channel (often the red plug) to Input 2.
Input 2 Input 1
(right channel) (left channel)
Source selector and Gain control for Input 1
3
On the front of the Mbox 2 Academic, turn
the Mix control fully left to Input.
4
On the front of the Mbox 2 Academic, care-
fully turn the Gain control to the right to in-
crease the input level of your guitar.
Mbox 2 Academic connections for line-level stereo
input source
If your keyboard has unbalanced outputs,
use the Mbox 2 Academic’s DI inputs. Refer
to your keyboard’s documentation
2
On the front of the Mbox 2 Academic, set the
source to Line by pressing the Source selector
until the Line LED is lit.
USO
RESTRITO