DigiDesign Digi 001, Быстрый старт

Страница: 74 / 82

Digi 001 Quick Start Guide 70
To set the Hardware Buffer Size for record or playback:
1
Choose Setups > Hardware.
2
Choose the number of samples from the H/W Buffer Size pop-up.
Low Latency Monitoring
Pro Tools LE includes a feature called Low Latency Monitoring for Digi 001 systems. This
feature allows you to use a built-in mixer on the Digi 001 PCI card to record and monitor
up to 16 inputs (8 analog and 8 ADAT) with extremely low latency. This mode can be very
desirable for recording multiple instruments at the same time, or a band.
To enable Low Latency Monitoring:
■
Select Operations > Low Latency Monitoring.
To use Low Latency Monitoring tracks must be record-enabled, assigned to an actual audio
input (not a bus), and assigned to outputs 1 or 2.
When Low Latency Monitoring is enabled, any plug-ins and sends assigned to record-
enabled tracks (routed to Outputs 1–2) are automatically bypassed, and must remain
bypassed. Also, these tracks will not register on meters for Master Faders.
Setting the Hardware Buffer size in the Hardware Setup dialog
set Buffer here for recording
set buffer here for playback