manualshive.com logo in svg

DigiDesign D-Command, Руководство пользователя

Поделиться
Скачать
DigiDesign D-Command Скачать руководство пользователя страница 86

D-Command Guide

80

ApTrgt (Target Track from Application) 

Determines whether se-

lecting an Insert or Send on-screen focuses its track on the 
D-Command Main Unit. 

ChanWn (Channel Window Display) 

Determines whether dis-

playing plug-in or send pan parameters (by pressing an en-
coder Select switch) on D-Command opens the corresponding 
plug-in or send window on-screen in Pro Tools. Also deter-
mines whether the Channel Select switches (in the Dynamics 
or EQ sections) change the channel display of multi-mono 
plug-ins. 

‹

When this preference is set to “Yes,” the on-screen display 

of plug-in and send windows changes to reflect the state of the 
control surface. 

‹

When this preference is set to “No,” the on-screen display of 

plug-in and send windows does not change to reflect the state 
of the control surface. 

Import PIMaps (Import Plug-in Maps)  

Opens “Choose a map-

ping file” dialog in Pro Tools.

Export PIMaps (Export Plug-in Maps)  

Opens “Save Plug-in 

Mapping As” dialog in Pro Tools. 

Select (Select Switch Latch Mode) 

Determines whether chan-

nel Select buttons follow latching or exclusive-or (non-latch-
ing) behavior when in Select mode. 

Operation Switch (Page 3)

SoloFc (Focused Track Follows Solo) 

Determines whether a so-

loed track is automatically focused in the Focus Channel sec-
tion (this function works in both Select and Focus modes)

TchVal (Touch Display of Parameter Values On/Off) 

Turns off 

the display of parameter values when faders or encoders are 
touched.

Brdcst (Broadcast) 

Determines whether the XMON monitor-

ing system is in Broadcast mode, which prevents AFL and PFL 
solo modes from changing the XMON Control Room Input 
source.

2KbPan (Two-Knob Panning) 

Toggles linking of front and rear 

pan controls in surround panner windows to facilitate 
left-right motion in the surround field.

CFTrks (Custom Faders Display Hidden Tracks) 

Determines 

whether tracks that are hidden in Pro Tools are displayed or 
hidden in Custom Fader modes. Tracks that are hidden in 
Pro Tools but shown in Custom Faders cannot be Selected or 
Record enabled. 

Trk/Ed (Link Track and Edit Selection) 

Toggles the Options > 

Link Track and Edit Selection option, which automatically se-
lects a track or range of tracks when a selection is made in the 
track’s timeline.

Operation Switch (Page 4)

Import PIMaps (Import Plug-in Maps) 

Opens “Choose a map-

ping file” dialog in Pro Tools.

Export PIMaps (Export Plug-in Maps) 

Opens “Save Plug-in 

Mapping As” dialog in Pro Tools. 

Faders (Faders On/Off) 

Turns off D-Command faders to pre-

vent fader movement when monitoring a mix.

FilBnk (Always Fill Channel Strips When Banking)  

Toggles the 

preference setting that maximizes the number of channels dis-
played in Normal mode when banking. When selected, bank-
ing follows end stop behavior. 

FillCF (Always Fill Custom Faders When Banking)  

Toggles the 

preference setting that maximizes the number of channels dis-
played in Custom Faders when banking. When selected, bank-
ing follows end stop behavior. 

Automation Controls

AutoMatch Switch

The AutoMatch switch enables AutoMatch command in Latch 
or Write automation modes. 

Join Switch

The Join switch is used to manually resume writing automa-
tion on all channels that were previously writing automation 
after an automation pass is interrupted.

For more information about importing and exporting 
plug-in maps, see “Exporting and Importing .pim Files” on 
page 107.

The duplicate Focus Channel strip is not available when 
D-Command is in a Custom Fader mode.

Automation controls

AutoMatch

switch

Join

switch

Actions

switch

Modes

switch

Содержание D-Command









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды