DigiDesign D-Command, Руководство пользователя

Страница: 80 / 136

D-Command Guide 74
Session Management Section
The Session Management section includes controls for ses-
sion-wide management and save operations.
Go To Switch
The Go To switch is used to focus a specific track onto the Fo-
cus Channel section on the Main Unit.
To go to a specific track:
1
Press the Go To switch.
2
Enter the track position number for the track and press En-
ter.
Clear Clip Switch and Plug-in Clip Indicator
D-Command indicates occurrences of signal clipping on au-
dio tracks, sends, and plug-ins. (Clip indication on D-Com-
mand follows the clip settings in the Pro Tools Display prefer-
ences.)
The Clear Clip switch lights if a clip occurs on an audio track
or on a send anywhere in the session. The Plug-in Clip indica-
tor lights if a clip occurs on a plug-in anywhere in the session.
In addition, D-Command shows clipping with the following
indicators:
• If an audio track clips, the meter clip LED for the clipping
channel’s lights red.
• If a send clips, the Send switch flashes in the Channel Strip
Mode controls section. In addition, if one of the encoders
on the channel strip is controlling the clipping send, the
corresponding encoder clip LED lights red.
• If a plug-in clips, the Insert switch flashes in the Channel
Strip Mode controls section. In addition, if one of the en-
coders on the channel strip is displaying the clipping
plug-in, the corresponding encoder clip LED lights red.
Pressing the Clear Clip switch clears all clip indicators on
D-Command, and in the Pro Tools session.
All Notes Off Switch
The All Notes Off switch can be used to silence stuck notes
with MIDI devices. It sends an All Notes Off message to each
channel for all connected MIDI devices.
Publish Switch
The Publish switch executes the Send Session Via DigiDelivery
command in Pro Tools, opening the Send To DigiDelivery di-
alog on-screen.
Save Switch
The Save switch executes the Save Session command in
Pro Tools. Whenever a change is made in a session and the
Save command is available, this switch lights.
To save the current session:
1
Press the Save switch. The switch flashes, prompting confir-
mation of the Save command.
2
Do one of the following:
• To confirm the Save command, press the Save switch
again.
– or –
• To cancel the Save command, press Escape.
Redo Switch
The Redo switch executes the Redo command in Pro Tools.
Undo Switch
The Undo switch executes the Undo command in Pro Tools.
D-Command Session Management section
All Notes Off
switch
Redo
switch
Undo
switch
Clear Clip
switch
Publish
switch
Save
switch
Plug-in Clip
indicator
Go To
switch