manualshive.com logo in svg

DigiDesign D-Command, Руководство пользователя

Поделиться
Скачать
DigiDesign D-Command Скачать руководство пользователя страница 54

D-Command Guide

48

Plug-in Automation Controls

The Plug-in Automation controls are used to enable parame-
ters for automation and to place them in automation safe 
mode.

Enable Parameters Switch

The Enable Parameters switch lets you enable parameters for 
automation by touching or pressing their controls. 

In Enable Parameters mode, the Enable Parameters switch is 
lit. While in this mode, the Auto LED for any rotary encoder 
enabled for automation is lit red, and the switch for any pa-
rameter enabled for automation is lit. 

To toggle automation on and off for plug-in parameters:

1  

Press the Enable Parameter switch.

2  

Touch the rotary encoders or press the switches for the con-

trols for which you want to toggle automation on or off. 

3  

Press the Enable Parameter switch again to exit Enable Pa-

rameters mode.

Automation Safe Switch

The Automation Safe switch invokes a mode in which the By-
pass/Mute/Pre switch for each plug-in or send and the chan-
nel Select switch for each track become Safe switches.

Plug-ins and Sends

While in Automation Safe mode, pressing a Bypass/Mute/Pre 
switch on a plug-in or send protects any automation on that 
plug-in or send from being overwritten. The Bypass/Mute/Pre 
switch for any protected plug-in or send is lit, reflecting the 
state of the Safe button in the on-screen plug-in or send out-
put window. 

Tracks

While in Automation Safe mode, pressing a channel Select 
switch protects volume, pan and mute parameters on that 
track from being overwritten. The channel Select switch for 
any protected track is lit, reflecting the state of the Safe button 
in the on-screen track output window.

To toggle automation safe on and off:

1  

Press the Automation Safe switch.

2  

Press the channel Select switch on the tracks for which you 

want to toggle automation safe status. The automation safe 
status of the track is reflected by the Safe button in the track’s 
on-screen output window. 

3  

Press the Bypass/Mute/Pre switch for the plug-ins or sends 

for which you want to toggle automation safe status. 

4  

Press the Automation Safe switch again to exit Automation 

Safe mode.

Plug-in Automation controls

You can also toggle automation for a plug-in parameter by 
holding Start+Alt (Windows) or Con-
trol+Option (Mac) and touching the rotary encoder for the 
parameter.

Enable Parameter

switch

Automation Safe
switch

Содержание D-Command









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды