manualshive.com logo in svg

DigiDesign Control 24, Руководство пользователя, Страница: 64 / 159

Поделиться
Скачать
DigiDesign Control 24 Скачать руководство пользователя страница 64

Control|24 Guide

54

Stereo and Surround 
Monitoring Modes

Control|24 can be used to monitor in Stereo 
mode, or in a supported multichannel Surround 
modes (LCRS, and 5.1). 

Global monitoring modes are selectable be-
tween stereo, LCRS Surround, and 5.1 Surround 
with dedicated switches. Each mode has unique 
features and options, which require audio con-
nections appropriate for stereo, LCRS, or 5.1 
routing. 

Stereo Monitor Mode Over view

In stereo mode, the Control Room Monitor sec-
tion lets you monitor in stereo, with the follow-
ing features:

• Source switching between six stereo sound 

sources (Pro Tools Sources 1&2, 3&4, and 
5&6; stereo External Sources 1–3).

• Switching between MAIN or ALT monitors, 

each with independently-adjustable levels.

• Control of Aux output levels, for cue and 

headphone mixes.

• DIM, MUTE, and MONO monitoring modes.

• Talkback and Listenback controls.

• Stereo monitoring can be configured for sin-

gle-source or multi-source monitoring. 

Monitoring Single and Multiple 
Input Sources

In Stereo Monitor mode, input can be set for sin-
gle source (default) or multi-source operation. 
(In Surround modes, multi-source/discrete rout-
ing is always enabled.) 

Surround Monitor Mode Overview

The Control Room Monitor section enables you 
to use discrete Surround mix sources for moni-
toring: 

• 4-channel LCRS Surround, comprised of four 

signals: Left, Center, Right, and Surround 
(mono).

• 6-channel Surround (5.1) comprised of six sig-

nals: Left, Right, Center, LFE (Subwoofer), Left 
Surround, and Right Surround.

Surround formats such as DTS, Dolby Digital, 
and Dolby Surround (ProLogic) require specific 
encoding and decoding hardware or software in 
order to create multi-channel mixes. See “5.1 
Surround Monitoring and Control Room Op-
tions” on page 25 for more information.

Содержание Control 24
































































































































































Отзывы:

Нет отзывов