manualshive.com logo in svg

DigiDesign Control 24, Руководство пользователя, Страница: 123 / 159

Поделиться
Скачать
DigiDesign Control 24 Скачать руководство пользователя страница 123

Chapter 13: Plug-Ins and Inserts

113

EQ and DYN Switches and 
Modes

The EQ and DYN switches are dedicated to EQ 
and Dynamics plug-ins respectively, that func-
tion in different ways depending on the config-
uration of the global EDIT/BYP switch.

The EQ switch is supported by all Digidesign 
and Digidesign-distributed EQ plug-ins, and the 
DYN switch affects most compressor, gate, and 
limiter plug-ins.

Bypass Mode

When the EDIT/BYP switch LED is lit, the EQ 
and DYN switches on each channel are in By-
pass mode. A channel’s EQ and DYN switches 
function in Bypass mode as a toggle switch to 
bypass all plug-ins on that channel of the 
switch’s type.

Any assigned, bypassed EQ and Dynamics plug-
ins are indicated by a 

lit

 EQ or DYN switch LED. 

Edit Mode

When the EDIT/BYP switch LED is not lit, the 
EQ and DYN switches on each channel are in 
Edit mode. In Edit mode, pressing an EQ or DYN 
switch opens the first plug-in of that type (EQ or 
Dynamics) assigned to the switch’s channel, 
and enables Parameters mode.

In Parameters mode, a plug-in is enabled for ed-
iting, and its parameters are displayed across the 
scribble strips. If the PLUG-IN switch in the 
WINDOW section is lit, the plug-in’s window 
will open on-screen.

Double-clicking the EQ or DYN switch will step 
through to the next insertion point where a 
plug-in of that type, if any, has been assigned, 
and will open the plug-in in Parameters mode. 

A single press after editing a plug-in in Parame-
ters mode will return Control|24 to Home mode. 
Pressing the same EQ or DYN switch the next 
time, will open the last plug-in accessed by that 
switch.

AUTO/SELECT Switch

In Parameters mode, the AUTO/SELECT switch 
enables encoder switches to toggle their focused 
plug-in in or out. In this mode, the AUTO/SE-
LECT switch LED will not be lit. 

If Control|24 is in Parameters mode, and a chan-
nel is in an Automation Write mode (WRITE, 
TOUCH or LATCH), the AUTO/SELECT switch 
LED will light, indicating that the encoder 
switches are enabled to arm the selected plug-in 
parameter for automation. 

Interrogating the Function of Plug-In 
Parameters

To determine the function of any displayed plug-in 
parameter:

■

While pressing the SHOW INFO switch, press 

an encoder switch associated with a plug-in pa-
rameter. An 8-character description of the plug-
in parameter will be displayed in the Channel 
Bar display for as long as both switches are 
pressed.

When the AUTO/SELECT switch is lit, the 
encoder switches can be used to punch the 
encoder’s associated plug-in parameter out 
of Automation Write mode. This only ap-
plies to variably-adjustable parameters, and 
will not work for toggling plug-in parame-
ters.

Содержание Control 24
































































































































































Отзывы:

Нет отзывов