DigiDesign ADAT Bridge I/O Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 68

background image

ADAT Bridge I/O

10

continuously active on the AES/EBU jacks,
carrying audio routed to outputs 1–2 in
Pro Tools.

7. S/PDIF In/Out

These are unbalanced, two-conductor RCA
jacks that accept and output a 24-bit
S/PDIF digital data stream. Output is con-
tinuously active on the S/PDIF jacks, carry-
ing audio routed to outputs 1–2 in
Pro Tools. To avoid RF interference during
S/PDIF transfers, we recommend that you
use 75 ohm coaxial cable and don’t exceed
a maximum cable length of 10 meters.

8. Slave Clock In/Out

The Slave Clock Out jack is a standard BNC
connector that outputs a 256x Super Clock
signal for slaving additional ADAT Bridge
I/Os, audio interfaces, or synchronization
peripherals.

The Slave Clock In jack is a standard BNC
connector designed to receive a 256x Super
Clock signal from another ADAT Bridge
I/O, another Digidesign audio interface, or
a synchronization peripheral that passes
Slave Clock, such as the USD. Because cru-
cial timing data is passed via these ports,
you should use high-quality, 75 ohm RG-
59 cables for making connections and keep
total cable lengths to less than 3 meters be-
tween all connected devices.

9. Word Clock Out

The Word Clock Out jack is a standard
BNC-type connector that outputs a word
clock signal. This jack is typically used to
connect the ADAT Bridge I/O to a BRC or

other sync device that requires a separate
word clock input for properly resolved
sync.

10. AC Power Input

This connector accepts a modular AC
power cable. The Digidesign ADAT Bridge
I/O is auto power-selecting (100V–240V)
and will work with a standard modular ca-
ble when connected to AC power recepta-
cles in any country.

Primary Connections
(Bridge I/O to Pro Tools
and ADAT)

This section covers the basic connections
between the ADAT Bridge I/O, your
Pro Tools system, and ADAT devices.

Optical Connections

Quick Connections

◆

For One ADAT:
• ADAT Bridge Optical #1 Out to ADAT

#1 Optical Input.

• ADAT Bridge Optical #1 In to ADAT #1

Optical Output.

◆

For Two ADATs:
• Other connections are same as instruc-

tions for one ADAT, but adding ADAT
Bridge Group B Optical In/Out to
ADAT #2 Optical Out/In.

«
...
12
13
14
15
16
...
»

Содержание ADAT Bridge I/O





































































Отзывы:

Нет отзывов

Похожие инструкции для ADAT Bridge I/O

Бренд: QFX Страницы: 44

Бренд: Tascam Страницы: 35

Бренд: National Instruments Страницы: 45

Бренд: Patton electronics Страницы: 7

Бренд: Sencore Страницы: 126

Бренд: Hamron Страницы: 28

Pro Enigma MI-X450

Бренд: Aiwa Страницы: 13

Бренд: PRIZM Страницы: 7

Бренд: Digitus Страницы: 4

Бренд: Goobay Страницы: 4

Бренд: Hoymiles Страницы: 2

Бренд: Microchip Technology Страницы: 24

Бренд: Drivecon Страницы: 28

Бренд: ADF Web Страницы: 30

Бренд: TV One Страницы: 116

Бренд: MEDIAZONE Страницы: 20

Бренд: Mach Speed Страницы: 36

Бренд: SIP Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды