digicon dflow, Руководство по эксплуатации продукта

Страница: 5 / 41

5
2. Safety Instructions
2.1 Symbols
Ÿ Read and Retain Instructions
Carefully read all safety and operating instructions before operating this equipment, and
retain them for future reference.
Ÿ
Follow Instructions and Heed Warnings
Follow all operating and use instructions. Pay attention to all warnings and cautions in the
operating instructions, as well as those that are affixed to this equipment.
Ÿ
Terminology
The terms defined below are used in this document. The definitions given are based on
those found in safety standards.
Service Personnel - The term
service personnel applies to trained and qualified individuals
who are allowed to install, replace, or service electrical equipment. The service personnel
are expected to use their experience and technical skills to avoid possible injury to
themselves and others due to hazards that exist in service and restricted access areas.
User and Operator - The terms
user and operator apply to persons other than service
personnel.
Ground(ing) and Earth(ing) - The terms
ground(ing) and earth(ing) are synonymous.
This document uses ground(ing) for clarity, but it can be interpreted as having the same
meaning as earth(ing).
Ÿ
Electric Shock Hazard
This equipment meets applicable safety standards.
You may find this symbol in the document that accompanies this product. This
symbol indicates important operating or maintenance instructions.
You may find this symbol affixed to the product. This symbol indicates a live
terminal where a dangerous voltage may be present.
You may find this symbol affixed to the product. This symbol indicates a
protective ground terminal.
WARNING
To reduce risk of electric shock, perform the instructions that are
included in the installation and operating instructions. Refer all servicing
to qualified service personnel only.
WARNING
To reduce risk of electric shock, before servicing, turn off the
equipment's electrical power by switching the circuit breaker to the OFF
position. Refer all servicing to qualified service personnel only.