digicon dflow, Руководство по эксплуатации продукта

Страница: 24 / 41

24
When the overhead detection system is installed, care must be taken with the
correct installation side. There are indications on the sensor plate so that there is
no error.
• The arrow must always point to the exit side;
• The
dFlow receiver (R) will always be to the right of the Sensor;
• The dFlow transmitter (T) will always be to the left of the Sensor.
As shown in the figure below:
EXTENDED VIEW
Entrance direction
dFlow R
dFlow T
Exit
Figure 19