XLR PRO Radio Frequency (RF) Modem User Guide
33
XLR PRO AT command reference tables
Special commands
Command
Name and description
Range
Default
AC
Apply Changes:
Immediately applies new settings without
exiting command mode.
—
—
FR
Software Reset:
Reset module. Responds immediately with
an “OK” then performs a reset 100ms later.
—
—
RE
Restore Defaults
: Restore module parameters to factory
defaults.
—
—
WR
Write:
Write parameter values to non-volatile memory so
that parameter modifications persist through subsequent
resets.
Note
Once WR is issued, no additional characters should be
sent to the module until after the "OK\r" response is
received.
Note
When you issue a write command, you must add a
100ms delay or wait for an OK response before issuing
any subsequent AT commands.
—
—