Digi XBee DigiMesh 2.4, Руководство пользователя

Страница: 78 / 157

AT commands Network commands
XBee/XBee-PRO DigiMesh 2.4 RF Module User Guide 78
Parameter range
0 - 2
Parameter Description Routes packets
0 Standard router Yes
1 N/A N/A
2 End device No
Default
0
BH (Broadcast Hops)
The maximum transmission hops for broadcast data transmissions.
If you set BH greater than NH , the device uses the value of NH .
Parameter range
0 - 0x20
Default
0
NH (Network Hops)
Sets or displays the maximum number of hops across the network. This parameter limits the number
of hops. You can use this parameter to calculate the maximum network traversal time.
You must set this parameter to the same value on all nodes in the network.
Parameter range
1 - 0x20 (1 - 32 hops)
Default
7
DM (DigiMesh Options)
A bit field mask that you can use to enable or disable DigiMesh features.
Bit:
0: Disable aggregator updates. When set to 1, the device does not issue or respond to AG requests.
1: Disable Trace Route and NACK responses. When set to 1, the device does not generate or respond
to Trace Route or NACK requests.
Parameter range
0 - 0x03 (bit field)
Default
0