AT commands
Addressing commands
Digi XBee Cellular LTE Cat 1 Embedded Modem User Guide
55
Parameter range
N/A
Default
N/A
SL (Serial Number Low)
The lower digits of the unique International Mobile Equipment Identity (IMEI) assigned to this device.
Parameter range
N/A
Default
N/A
DL (Destination Address)
The destination IPv4 address or fully qualified domain name.
To set the destination address to an IP address, the value must be a dotted quad, for example
XXX.XXX.XXX.XXX
.
To set the destination address to a domain name, the value must be a legal Internet host name, for
example
remotemanager.digi.com
Parameter range
0 - 128 ASCII characters
Default
0.0.0.0
P# (Destination Phone Number)
Sets or displays the destination phone number used for SMS when
IP
(IP Protocol) = 2. Phone numbers
must be fully numeric, 7 to 20 ASCII digits, for example: 8889991234.
P#
allows international numbers with or without the
+
prefix. If you omit
+
and are dialing
internationally, you need to include the proper International Dialing Prefix for your calling region, for
example, 011 for the United States.
Range
7 - 20 ASCII digits including an optional
+
prefix
Default
N/A
DE (Destination Port)
Sets or reads the destination IP port number.
Parameter range
0x0 - 0xFFFF