Digi XBee 3 Cellular LTE-M, Руководство пользователя, Страница: 200 / 331

AT commands Addressing commands
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide 200
OD (Operating Destination Address)
Read the destination IPv4 address currently in use by Transparent mode. The value is 0.0.0.0 if no
Transparent IP connection is active.
In API mode, the address is represented as the binary four byte big-endian numeric value representing
the IPv4 address.
In Transparent or Command mode, the address is represented as a dotted-quad string notation.
Parameter range
-
Default
0.0.0.0
DE (Destination port)
Sets or displays the destination IP port number used in Transparent mode.
This command reads all input as hexadecimal. All values must be entered in hexadecimal with no
leading 0x. For example, the destination port 9001 has the hexadecimal value of 0x2329. The
command would be entered as
ATDE 2329 .
Parameter range
0x0 - 0xFFFF
Default
0x2616
C0 (Source Port)
The IP port used to listen for incoming connections (TCP/TLS) or incoming data (UDP) when using
Transparent mode or API mode with implicit sockets.
As long as a network connection is established to this port (for TCP) data received on the serial port is
transmitted on the established network connection.
IP (IP Protocol) sets the protocol used.
For more information on using incoming connections, see Socket behavior .
Parameter range
0 - 0xFFFF
Value Description
0 Disabled
Non-0 Enabled on that port
Default
0