Digi XBee 3 Cellular LTE-M, Руководство пользователя, Страница: 244 / 331

AT commands Power measurement commands
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide 244
Field Description
STATE
The state of the socket:
n
ALLOCATED
n
CONNECTING
n
CONNECTED
n
LISTENING
n
BOUND
n
CLOSING
PROTOCOL
The protocol of the socket:
n
UDP
n
TCP
n
TLS
LOCAL_PORT The local port of the socket. This is 0 unless the socket is
explicitly bound to a port.
REMOTE_PORT The remote port of the socket.
REMOTE_ADDRESS The remote IPv4 address for the given socket. This is 0.0.0.0 for
an unconnected socket.
Parameter range
0x00 - 0xFE
Default
-
Power measurement commands
The following commands enable you to access voltage readings and manage a value for minimum
allowed operating voltage.
%V command
Measures the supply voltage of the XBee VCC pin for the device in mV units.
Parameter range
N/A
Default
N/A
%L (Low voltage shutdown base threshold)
Sets the voltage threshold in millivolts at which the XBee enters a shutdown state. You must enable
this feature by setting the
DO command bit 4. See Low voltage shutdown .