Getting started with the XBee Smart Modem Development Kit
Perform a (GET) HTTP request
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
29
17. Click
Send selected packet
.
18. A GET HTTP response from httpbin.org appears in the Console log.
Debugging
If you experience problems with the settings in this example, you can load the default settings in
XCTU:
1. On the Configuration toolbar, click the
Default
button
to load the default values
established by the firmware, and click
Yes
to confirm.
2. Factory settings are loaded but not written to the device. To write them, click the
Write
button
on the toolbar.