Getting started with the XBee Smart Modem Development Kit
Connect to the Daytime server
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
25
10. Click the
Open
button
to open a serial connection to the device.
11. Click in the left pane of the
Console log
, then type in the Console to query the Daytime server.
The following screenshot provides an example of this chat.
Debugging
If you experience problems with the settings in this example, you can load the default settings in
XCTU:
1. On the Configuration toolbar, click the
Default
button
to load the default values
established by the firmware, and click
Yes
to confirm.
2. Factory settings are loaded but not written to the device. To write them, click the
Write
button
on the toolbar.