Digi TX54, Руководство пользователя

Страница: 953 / 1087

Central management Configure multiple devices using profiles
TX54 User Guide 953
3. View the central management configuration:
(config)> show cloud
drm
cellular_keep_alive 290s
drm_url my.devicecloud.com
keep_alive 60s
keep_alive_misses 3
retry_interval 30s
enable true
(config)>
1. Type cancel to exit configuration mode:
(config)> cancel
>
2. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
To view the status of your device's connection to Remote Manager, use the show cloud command at
the command line:

Command line
> show cloud
Device Cloud Status
-------------------
Status : Connected
Server : my.devicecloud.com
Device ID : 00000000-00000000-0040FFFF-FF0F4594
>
The Device ID is the unique identifier for the device, as used by the Remote Manager.
Configure multiple devices using profiles
Digi recommends you take advantage of Digi Remote Manager profiles to manage multiple TX54
routers. Typically, if you want to provision multiple TX54 routers:
1. Using the TX54 local WebUI, configure one TX54 router to use as the model configuration for all
subsequent TX54s you need to manage.
2. Register the configured TX54 device in your Digi Remote Manager account.
3. In Digi Remote Manager, create a profile based on the configured TX54.
4. Apply the profile to the TX54 devices you need to configure.
Digi Remote Manager provides multiple methods for applying profiles to registered devices. You can
also include site-specific settings with a profile to override settings on a device-by-device basis.