Digi TX54, Руководство пользователя

Страница: 1086 / 1087

Command line interface Command line reference
TX54 User Guide 1086
Syntax
system time sync
Parameters
None
system time test
Test the configured NTP server(s) for connectivity. This test will not affect the device's current local
date and time.
Syntax
system time test
Parameters
None
telnet
Use Telnet protocol to log into a remote server.
Syntax
telnet <host> [ port INTEGER]
Parameters
host: The hostname or IP address of the remote host.
port: The telnet port to use to connect to the remote host. (Minimum: 1, Maximum: 65535, Default: 23)
traceroute
Print the route packets trace to network host.
Syntax
traceroute <host> [ ipv6 ] [ gateway STRING] [ interface STRING] [ first_ttl
INTEGER] [ max_ttl INTEGER] [ port INTEGER] [ nqueries INTEGER] [ src_addr STRING]
[ tos INTEGER] [ waittime INTEGER] [ pausemsecs INTEGER] [ packetlen INTEGER]
[ debug ] [ dontfragment ] [ icmp ] [ nomap ] [ bypass ]
Parameters
host: The host that we wish to trace the route packets for.
ipv6: If a hostname is defined as the value of the 'host' parameter, use the hosts IPV6 address.
gateway: Tells traceroute to add an IP source routing option to the outgoing packet that tells the
network to route the packet through the specified gateway.
interface: Specifies the interface through which traceroute should send packets. By default, the
interface is selected according to the routing table.
first_ttl: Specifies with what TTL to start. (Minimum: 1, Default: 1)