Digi TransPort WR11, Руководство пользователя

Страница: 281 / 866

Configure network interfaces Configure serial interfaces
Digi TransPort WR Routers User Guide 281
Command Mappings parameters
The router supports a number of command aliases which specify strings to be substituted for
commands entered at the command line. The table on this page contains two text entry boxes and
an Add button. Up to 23 command mappings may be specified. An example may make this clear.
Suppose, a user coming from a Unix™ background feels more comfortable typing ls rather than the
native dir command in order to list the files in a directory. To achieve this aliasing, enter ls into the
From column in the table, dir into the To column and then click the Add button.
From
The substitute text.
To
The command that should be substituted.
Add
Click this button to add the command mapping.
Delete
When the mapping has been added, a Delete button is enabled in the right-hand column.
Clicking this button removes the binding from the table.
Allow AT Responses
Enables or disables entry of AT commands and their responses over the serial port.
Note If either the From or To string contains spaces, the entire string must be enclosed within
double quotation marks. When substituting a command, upper case characters are
considered the same as the corresponding lower case characters.
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
cmd n cmdmapi Replacement command From
cmd n cmdmapo Command to be substituted To