Digi TransPort LR54, Руководство пользователя

Страница: 27 / 1113

Digi LR54 hardware reference Digi LR54 serial connector pinout
LR54 User Guide 27
6. Wi-Fi 2.4 GHz (Wi-Fi-enabled models only)
Indicates state and activity on the 2.4 GHz Wi-Fi interface.
n
Off : 2.4 GHz Wi-Fi interface is disabled.
n Solid green : 2.4 GHz Wi-Fi interface is enabled.
7. Wi-Fi 5 GHz (Wi-Fi-enabled models only)
Indicates state of and activity on 5 GHz Wi-Fi interface.
n
Off : 5 GHz Wi-Fi interface is disabled.
n
Solid green : 5 GHz Wi-Fi interface is enabled.
8. Ethernet 1-4 Link and Activity (on rear panel)
The LEDs on the WAN/ETH1 , ETH2 , ETH3 , and ETH4 ports indicate that the Ethernet network
interface is up and there is activity on the network interface.
n
Off : No Ethernet link detected.
n
Solid green : Ethernet link detected.
n
Blinking green : Indicates Ethernet traffic.
Digi LR54 serial connector pinout
The LR54 is a DCE device. The pinout for the DB9 serial connector is as follows:
Signal name RS232 signal
DTE signal
direction
DB9 pin number
Transmit Data TxD In 3
Receive Data RxD Out 2
Ready To Send RTS In 7
Clear to Send CTS Out 8
Data Set Ready DSR Out 6
Ground GND N/A 5
Data Carrier Detect DCD Out 1
Data Terminal Ready DTR In 4
Ring Indicate
RI Out Not connected
QR code definition
A QR code is printed on the label attached to the device and on the loose label included in the box
with the device components. The QR code contains information about the device.