Digi TransPort LR54-AA401, Руководство пользователя

Страница: 104 / 169

Command descriptions
TransPort LR User Guide 151
dhcp-server
Configures Dynamic Host Configuration Protocol (DHCP) server settings.
Syntax
dhcp-server <1 - 10> <parameter> <value>
Parameters
state
Enables or disables this DHCP server.
Value is either on or off. The default value is off.
ip-address-start
The first IP address in the pool of addresses to assign.
Value should be an IPv4 address.
ip-address-end
The last IP address in the pool of addresses to assign.
Value should be an IPv4 address.
mask
The IP network mask given to clients.
Value should be an IPv4 address.
gateway
The IP gateway address given to clients.
Value should be an IPv4 address.
dns1
Preferred DNS server address given to clients.
Value should be an IPv4 address.
dns2
Alternate DNS server address given to clients.
Value should be an IPv4 address.
lease-time
The length, in minutes, of the leases issued by this DHCP server.
Accepted value is any integer from 2 to 10080. The default value is 1440.