Digi PortServer II, Руководство пользователя

Страница: 101 / 277

90030500B Basic Configuration Page 81
Using configuration commands
You can use the
set
command with different variables to change individual parame-
ters or to add new devices and functionality. The variables available are summarized
below, and their use is described in subsequent chapters. You can also find informa-
tion on
set
command syntax in the Command Reference Guide.
altip Defines an alternate IP address for a PortServer II port or a group of
ports, allowing (for example) it to be included in hunt groups.
arp Sets ARP (Address Resolution Protocol) Table entries, which map
IP addresses to Ethernet addresses.
auth Sets the access permissions for PortServer II’s serial ports.
chat Defines telephone number strings that PortServer II will translate.
config Sets configuration options, including an IP address for PortServer
II.
device Sets devices for PortServer II to use when making outgoing connec-
tions.
filter Sets filters that control and record traffic over PPP, SLIP, and
CSLIP links.
flow Sets hardware and software flow control parameters for RS-232
serial ports.
forward Sets IP packet routing options for connections that use PPP, SLIP,
and CSLIP links.
frame
relay Sets parameters for connecting a port to a Frame Relay service.
FrDLCI Sets the configuration for a single virtual connection on a serial
port.
host Sets hosts that PortServer II can communicate with.
keys Sets local key combinations that have specific functions on the Port-
Server II local terminal, for example,
kill
and
erase
.
line Sets or views the parameters for a single serial port or group of
ports.
logins Sets login, password, and command line prompts.
menu Creates a menu from which the user can select connection options.
modem Sets initialization and tests scripts to use with a modem.