Digi NetSilicon Connectware Connect Series, Руководство пользователя

Страница: 19 / 37

20 Configuring a TCP Client
Configuring a TCP Client
Introduction
This section describes how to configure the product as a TCP
client. It describes the features of this configuration and
provides detailed setup procedures.
About This Configuration
In this configuration, the device initiates TCP connections to
applications running on servers or to devices connected to
server serial ports. This is sometimes called TCP socket
service. The connection can be configured to be always
active or to be triggered by a particular event, such as when
the DCD signal goes high or data arrives at the port. The
figure illustrates this configuration.