background image

1

Verify Kit Contents

   

©  Digi International, Inc., 2009

Digi, Digi International, Digi m10 

l

and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide.   All other trademarks are property of their respective owners.

3

 

 

2

Install Software and Documentation

 

Quick Start Guide

a

Connect the USB cable to the development board and a corresponding USB port on your PC

Note: If a connection via RS232 is preferred instead of USB, simply attach the included serial cable to the DB9 connector 

on the development board that is marked as “Host Port”.  Please also note that the DTR line (PWR_EN) 

must

 be asserted 

when using an RS232 connection to the satellite modem.

c

Attach the satellite antenna to the connector on the base by turning the antenna clockwise until it 

clicks

 into place

Note: The antenna base provides a strong magnet for mounting purposes. Keep it away from items and equipment 

 

d

Connect the power supply to the development board and turn it on using the power switch

Digi m10

 

Satellite Modem

JumpStart Kit

Set Up Your Hardware

a

b

If the Digi m10 JumpStart Kit installation does not start

automatically, simply double-click on “Setup.exe” in the CD’s root folder

Note: 

setup instructions below. This Quick Start Guide will then also guide you through 

the initial setup of your satellite modem and sending a test message using the 

Setup Wizard of the Satellite Dashboard application you just installed.  

Magnetic

Antenna Base

with Cable

Telescopic 

Satellite

Antenna

USB Cable

Serial Cable

Installation CD

BNC Antenna 

     Adapter

Digi m10 Module and 

 Development Board

International Power Supply Adapters

Power Supply

Insert the Digi m10 JumpStart Kit CD into your CD/DVD drive

b

Screw the BNC antenna adapter on to the development board’s antenna connector 

Connect the base to the antenna connector on the development board using the provided cable and

turn the connector on the cable clockwise until it also 

clicks

 securely into place

 

Note: Make sure the antenna is fully extended and located in an area with an 

unobstructed view of the sky

    

e

aa

c

d

b

e

(1P):90033935-88 B

Отзывы: