Digi IX14, Руководство пользователя

Страница: 183 / 828

User authentication Authentication groups
IX14 User Guide 183
Add an authentication group 185
Delete an authentication group 189
Change the access rights for a predefined group
By default, two authentication groups are predefined: admin and serial . To change the access rights
of the predefined groups:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click Authentication > Groups .
4. Click the authentication group to be changed, either admin or serial , to expand its
configuration node.
5. Click the box next to the following options, as appropriate, to enable or disable access rights
for each:
n
Admin access
For groups assigned Admin access, you can also determine whether the Access level
should be Full access or Read-only access .
l
Full access provides users of this group with the ability to manage the IX14 device
by using the WebUI or the Admin CLI.
l
Read-only access provides users of this group with read-only access to the WebUI
and Admin CLI.
The default is Full access .
n
Interactive shell access