Digi IX10, Руководство пользователя

Страница: 384 / 874

Virtual Private Networks (VPN) L2TP
IX10 User Guide 384
1701).
While multiple L2TP clients are supported on the IX10 by configuring a separate LNS for each client,
multiple clients behind a Network Address Translation (NAT) device are not supported, because they
will all appear to have the same IP address.
Show L2TP tunnel status

Web
Show the status of L2TP access connectors from the WebUI
1. Log into the IX10 WebUI as a user with Admin access.
2. On the menu, select Status . Under VPN, select L2TP > Access Connectors .
The L2TP Access Connectors page appears.
3. To view configuration details about an L2TP access connector, click the

(configuration) icon
in the upper right of the tunnel's status pane.
Show the status of L2TP network servers from the WebUI
1. Log into the IX10 WebUI as a user with Admin access.
2. On the menu, select Status . Under VPN, select L2TP > Network Servers .
The L2TP Network Servers page appears.
3. To view configuration details about an L2TP network server, click the

(configuration) icon in
the upper right of the tunnel's status pane.

Command line
Show the status of L2TP access connectors from the Admin CLI
1. Select the device in Remote Manager and click Actions > Open Console , or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. To display details about all configured L2TP access connectors, type the following at the
prompt:
> show l2tp lac
Name Enabled Status Device
--------- ------- ------ -----------
lac_test1 true up test_device0
lac_test2 true pending
>