Digi IX10, Руководство пользователя

Страница: 343 / 874

Virtual Private Networks (VPN) OpenVPN
IX10 User Guide 343
3. To display details about a specific server:
> show openvpn server name OpenVPN_server1
Server : OpenVPN_server1
Enable : true
Type : tun
Zone : internal
IP Address : 192.168.30.1/24
Port : 1194
Use File : true
Metric : 0
Protocol : udp
First IP : 80
Last IP : 99
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Show OpenVPN client status and statistics
You can view status and statistics for OpenVPN clients from either web interface or the command line:

Web
1. Log into the IX10 WebUI as a user with Admin access.
2. On the menu, select Status > OpenVPN > Clients .
The OpenVPN Clients page appears.
3. To view configuration details about an OpenVPN client, click the

(configuration) icon in the
upper right of the OpenVPN client's status pane.

Command line
1. Select the device in Remote Manager and click Actions > Open Console , or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. To display details about all configured OpenVPN clients, type the following at the prompt:
> show openvpn client all
Client Enable Status Username Use File Zone
--------------- ------ ------- -------- -------- --------
OpenVPN_Client1 true connected true internal
OpenVPN_Client2 true pending true internal