Digi IX10, Руководство пользователя, Страница: 100 / 874

Interfaces Wireless Wide Area Networks (WWANs)
IX10 User Guide 100
7. (Optional) To configure the device to bypass its preconfigured APN list and only use the
configured APNs:
(config)> network interface modem modem apn_lock true
(config)>
8. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Show cellular status and statistics
You can view a summary status for all cellular modems, or view detailed status and statistics for a
specific modem.

Web
1. Log into the IX10 WebUI as a user with Admin access.
2. On the menu, click Status .
3. Under Connections , click Modems .
The modem status window is displayed

Command line
1. Select the device in Remote Manager and click Actions > Open Console , or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. Use the show modem command:
n
To view a status summary for the modem:
> show modem
Modem SIM Status APN Signal Strength
----- ------------- --------- --------- --------------------
modem 1 (ready) connected 1234 Good (-84 dBm)
>
n
To view detailed status and statistics, use the show modem name name command:
> show modem name modem
modem: [Telit] LM940
-------------------------------------------------------------------