DT 500P PRINTER
OPERATING INSTRUSTIONS
1
BATTERY INSERTION
1. With the POWER SWITCH in the OFF position press and slide down the battery cover.
2. Put in 4 pcs of AA size batteries in polarities as shown in the battery compartment.
3. Slide up the battery cover until it clicks closed.
- Always use batteries of the same manufacturer and replace all batteries at the same time,
- If the printer will not be used for a long time, remove the batteries from the battery compartment.
PAPER INSERTION
1. Open the paper cover.
2. Cut the end portion of the roll of thermal paper straight.
3. Turn on the printer.
4. Insert the end portion of the paper into the paper insertion slot in the correct way .
5. Keep pressing the PAPER ADVANCING SWITCH until the end of paper is 2-3 cm out from the
printer.
6. Put the roll of paper into the paper compartment and close the paper cover.
