Digi ConnectTank Getting Started Guide
Page 6
Introduction to Digi ConnectTank
Digi ConnectTank offers a low cost and seamless solution to monitor remote single tank locations. It has a
proven built-in ultrasonic sensor that periodically monitors the tank liquid level and alerts the backend via
Device Cloud. Digi ConnectTank runs on internal battery and communicates through the cellular network,
thereby avoiding expensive and cumbersome cabling and maintenance.
Digi ConnectTank has the following features.
• Digi ConnectTank has a M300/150 sensor with the following specifications:
◦
150 kilohertz, 8 degree beam angle
◦
Range of 10 centimeters to 2.5 meters (7 feet)
◦
Resolution of 0.25 milimeters
• Digi ConnectTank has a M300/95 sensor with the following specifications:
◦
95 kilohertz, 8 degree beam angle
◦
Range of 0.3 meters (1 foot) to 4 meters (13 feet)
◦
Resolution of 0.25 milimeters
•
Digi ConnectTank has a built-in temperature sensor.
•
Digi ConnectTank comes with an internal battery with more than two-year battery life under
recommended operating conditions, such as tank liquid level measurement and pushing the measured
data to Device Cloud twice a day.
•
Digi ConnectTank has six models based on cellular options. These models are described in
Digi ConnectTank Model Specifications
•
Digi ConnectTank comes with internal cellular and GPS antennas.
