Configure the device using the Digi ConnectPort X Family web interface
Management
Digi ConnectPort X Family
183
Management
Use the
Management
menu to view and manage connections and services for the Digi ConnectPort X
product.
You can monitor the port, device, system, and network activities of Digi ConnectPort X devices from a
variety of interfaces. Changes in data flow may indicate problems or activities that may require
immediate attention.
This chapter discusses monitoring and connection-management capabilities and tasks in Digi
ConnectPort X products.
Web interface
The web interface has several screens for monitoring Digi ConnectPort X Family devices:
n
Network status
n
Mobile connection status
n
Serial Port Management: for each port, the port’s description, current profile, port logs (if
activated), and current serial configuration.
n
Connections Management: A display of all active system connections.
n
System Information:
l
General device information.
l
Serial port information: for each port, including the port’s description, current profile, and
current serial configuration. The same information appears when you choose Serial Port
Management.
l
Network statistics: statistics for IP, TCP, UDP, and ICMP.
Manage connections and services
Use the
Management
menu to view and manage connections and services for the Digi ConnectPort X
product.
Serial Port Management
The Serial Port Management page (
Management
>
Serial Ports
) provides an overview of the serial
ports and their connections. Click
Connections
to display the active connections for a serial port. You
can refresh the view to see new serial-port connections, and you can disconnect serial-port
connections as needed.
Port Connections Management
The Port Connections Management page (
Management
>
Serial Ports
>
Connections
) displays active
Virtual Private Network (VPN) and system connections.
Manage Virtual Private Network (VPN) connections
To monitor a VPN connection from the web interface, select
Management
>
Connections
. The VPN
settings appear.
Note that the
Connect
and
Disconnect
functions do not work if VPN the uses a Pre-Shared Key (PSK).
