Command line interface
Use the scp command
Digi Connect EZ Mini User Guide
618
Note
For commands that operate on the Connect EZ's file system, such as the
cp
,
ls
, and
mkdir
commands, see
for information about the file system, including how to copy, move and
delete files and directories.
Use the scp command
The
scp
command uses Secure Copy Protocol (SCP) to transfer files between the Connect EZ device
and a remote host.
Required configuration items
n
The hostname or IP address of the remote host.
n
The username and password of the user on the remote host.
n
Whether the file is being copied to the Connect EZ device from a remote host, or to the remote
host from the Connect EZ device.
l
If the file is being copied to the Connect EZ device from a remote host:
o
The path and filename of the file on the remote host that will be copied to the Connect
EZ device.
o
The location on the Connect EZ device where the file will be copied.
l
If the file is being copied to a remote host from the Connect EZ device:
o
The path and filename of the file on the Connect EZ device that will be copied to the
remote host.
o
The location on the remote host where the file will be copied.
Copy a file from a remote host to the Connect EZ device
To copy a file from a remote host to the Connect EZ device, use the
command as follows:
> scp host
hostname-or-ip
user
username
remote
remote-path
local
local-path
to
local
where:
n
hostname-or-ip
is the hostname or ip address of the remote host.
n
username
is the name of the user on the remote host.
n
remote-path
is the path and filename of the file on the remote host that will be copied to the
Connect EZ device.
n
local-path
is the location on the Connect EZ device where the copied file will be placed.
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the Connect EZ device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/Connect EZ-
22.2.9.85.bin local /etc/config/scripts to local
[email protected]'s password: adminpwd
Connect EZ-22.2.9.85.bin
100%
36MB
11.1MB/s
00:03
>
