7
Installation Instructions
GENERAL INFORMATION
The following instructions will help you to mount your planer onto your
skidsteer loader. The planer uses the quick-attach system for ease of
installation. Therefore, if you know how to attach your loader bucket, attaching
the Profila should prove no problem.
Remember to read all safety warnings, decals and operating instructions
before operating the attachment. If there is any portion of this manual that you
do not understand, contact your dealer.
THE 150 PLANERS ARE DESIGNED FOR USE ON HIGH
FLOW HYDRAULIC SYSTEMS.
DO NOT ATTACH OR OPERATE ANY ATTACHMENT
THAT EXCEEDS THE RECOMMENDED LIFTING
CAPACITY OF YOUR SKIDSTEER.
INSTALLATION INSTRUCTIONS
1. Remove the shipping banding from around the planer and skid.
2. Remove any attachments from the front of the loader.
3. Following all standard safety practices and the instructions for installing
an attachment in your skid-steer operator's manual, install the planer
onto your skid-steer.
NOTE: It is important to make sure the locking mechanism on your
quick attach is engaged, therefore locking the attachment onto the
skid-steer.
4. Lower the unit to the ground and remove the key.
5. Relieve any pressure from the auxiliary hydraulic system and after
making sure that there is not any foreign matter on the hydraulic
couplers, connect the power and return couplers to the high flow
auxiliary hydraulic system of your skid-steer loader.
6. Connect the case drain coupler to the case drain on your skid-steer
loader.
7. Route the hoses in such a fashion as to avoid pinching or chafing.
BE SURE CASE DRAIN COUPLER IS COMPLETELY
ENGAGED.
IMMEDIATE HYDRAULIC MOTOR SEAL FAILURE AND
PLANETARY DAMAGE WILL OCCUR IF CASE DRAIN IS
Profila Operator’s Manual Installation Instructions
11
