INSTALLATION INSTRUCTIONS
Patio Drip
Watering Kit
Model FM01AS
with Backflow Preventer
INTRODUCTION
Thank you for purchasing the DIG model FM01AS Drip Watering Kit. Please take the time to read through
the enclosed instructions and follow them step by step. If you have any questions, please call our customer
service line at 1-800-344-2281. Use model FM01 or FM01AS Patio Drip Watering Kit to maximize your
efficient use of water and to promote abundant growth in your planters, potted plants or baskets. If you
decide to expand your system, all the necessary parts are available individually from a DIG distributor.
ABOUT YOUR PATIO DRIP WATERING KIT
The FM01AS Drip Watering Kit is designed to irrigate plants in hanging baskets, pots and planters. This kit
contains all the necessary parts to install a drip system for up to 10 pots or baskets. Note that two emitters
should be used for larger pots (12
″
–18
″
). This drip kit can be easily expanded to irrigate up to 15 pots
or baskets. Before the installation, familiarize yourself with all the parts in this kit. See the part list and
description at the end of this instruction manual and on the back of the box.
PLANNING SUGGESTION
Determine the number of pots or baskets you need to water, taking into account that pots greater then 12
″
need two or more drip emitters.
Option 1: For baskets up to 10
″
, use one dripper per pot. To do this, run the 1/4
″
micro tubing mainline
to the pot or basket. Cut the micro tubing near the pot or basket and add a 1/4
″
tee. To the tee, add an
additional section of micro tubing, which becomes the feederline. Run the micro tubing feederline into
the pot or basket about 1
″
from the plant. Insert a dripper into the end of the micro tubing and secure the
dripper with a tubing holder stake.
Option 2: For larger baskets (12
″
-18
″
), install two drippers per pot. To do this, run the 1/4
″
micro tubing
mainline to the pot or basket. Near the pot or basket cut the micro tubing and add a 1/4
″
tee. To the tee,
connect a length of micro tubing, which becomes the feederline. Run the micro tubing feederline into
the pot or basket. Inside the pot or a basket, split the mictotube into two feederlines using an additional
1/4
″
tee and two pieces of micro tubing, 3
″
-5
″
length. At the end of each micro tubing feederline, add one
dripper and secure the dripper using the tubing holder stake.
Ideally when everything is connected and running, each pot on a system should begin to drain water
at about the same time. If this is not happening, it is usually because there are various pot sizes. A 1/4
″
valve can be added to control the flow to each pot or section of pots. When planning out your system, it is
common to group like-size containers on one line, sectioning out the pots. In this situation, a single 1/4
″
valve can control the flow to a number of similar sized pots. If this is not possible because of the layout of
the pots, which is common, a 1/4
″
valve can be added to each line to individually control the water to the
pots. This ball valve will allow you to adjust the flow by turning the knob to either side.
Note: There are two ball valves available in the kit. If more ball valves are needed, use Model D33A,
Part #65.
1.800.322.9146 FAX: 760.727.0282
DIG CORPORATION 3 YEAR WARRANTY
DIG CORPORATION warrants these products to be free from defects in material and workmanship for a
period of three years from date of purchase. This warranty does not cover damage resulting from accident,
misuse, neglect, modification or improper installation. This warranty shall extend only to the original
purchaser and user of the product. The obligation of DIG CORPORATION under this warranty is limited
to repairing or replacing at its factory this product. This product must be returned to the factory within
three years after the original purchase and upon examination, is found to contain defects in material and
workmanship.
DIG CORPORATION SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY KIND; THE SOLE OBLIGATION OF DIG BEING LIMITED TO REPAIR OR REPLACEMENT
OF DEFECTIVE PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU.
Unattended use for prolonged periods without inspection to verify proper operation, is beyond the
intended use of this product. Any damage resulting from such use shall not be the responsibility of DIG
CORPORATION. There are no warranties which extend beyond the description on the face hereof. In the
case of purchase of the product for use other than for irrigation purposes, DIG CORPORATION hereby
disclaims any implied warranties, including any warranties of merchantability and fitness for a particular
purpose. In the case of the purchase of the product for personal, family or household purposes, DIG
CORPORATION disclaims any such warranties to the extent permitted by law. To the extent that any such
disclaimer or implied warranties shall be ineffectual, then any implied warranties shall be limited
in duration to a period of three years from the date of the original purchase for use by the purchaser.
Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may
not apply to you.
In order to obtain performance under this warranty, the unit must be returned to the factory, along with
proof of purchase indicating original date of purchase, shipping prepaid, addressed as follows:
DIG CORPORATION, 1210 Activity Drive, Vista, CA 92081. Repaired or replaced units will be shipped
prepaid to the name and address supplied with the unit returned under warranty. Allow four weeks for
repairs and shipping time. Repair of damaged units, not otherwise within warranty may be refused or
done at a reasonable cost or charge at the option of DIG CORPORATION.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
www.digcorp.com
1210 Activity Drive
Vista, CA 92081-8510
Printed in the USA. We at DIG strongly believe in conservation.
Please recycle whenever possible. 072318 26-009
