Diezel VHX, Руководство пользователя, Страница: 16 / 17

16
VHX DOS 1.71 OWNER’S MANUAL. © 2020 Diezel GmbH. All rights reserved.
d
UPDATE
The VHX could be updated using the USB connector located on the BACK PANEL together with a PC, MAC or USB OTG capable smartphone. Once
connected, MOUNT the USB mass storage via the SETTINGS screen. It will appear to the OS as an MSC DEVICE , and the internal memory will be
accessible just like a regular disk.
To UPDATE the VHX, please make sure that all the connection and power supply are stable and reliable, and follow the steps below:
DOWNLOAD the latest available software from www.diezelamplification.com support page.
POWER ON the VHX.
CONNECT the VHX to a PC or USB OTG capable smartphone.
MOUNT the VHX USB via SETTINGS screen.
COPY the file named DOS.bin in the VHX disk root.
POWER OFF the VHX.
POWER ON the VHX and wait for the update to finish. DO NOT power off the VHX during this last steps.
In case of any FAILURE , the VHX will enter in RECOVERY MODE , please follow the above steps again to recover.