MULTI MOVEMENT GUIDE
- 1 -
Simple analog
Time SeTTing
1. Pull the crown out to position 2.
2. Turn clockwise and set the time.
1
2
3
DATE
1
2
1
2
3
DATE
DAY
A
1 2 3
B
MINUTE
HAND
HOUR
HAND
SECOND
HAND
1
2 3
B
A
CHRONOgRApH
1/5 SECOND HAND
SECOND
HAND
CHRONOgRApH
MINUTE HAND
DATE
A
1 2 3
B
24-HOUR
HAND
MINUTE
HAND
SECOND
HAND
Chronograph B
Time and daTe SeTTing
1. Pull crown out to position 2.
2. Rotate crown clockwise until the previous
day’s date is shown in the date window.
3. Pull crown out to position 3.
4. Rotate crown clockwise until the correct
date is shown in the date window.
5. Continue to rotate crown to set correct am/pm time.
6. Return crown to position 1.
Note: Do not set the date between 9:00 p.m. and
12:30 a.m. to ensure accuracy.
Chronograph operaTion
1. Press A to start/stop the chronograph.
2. Press B to restart/reset.
Note: After 2 hours of continuous running, the
chronograph will automatically stop and reset to save
the battery.
SpliT Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
Chronograph zero reSeT
1. If either of the chronograph hands is not at the zero
(12:00) position, pull crown out to position 2.
2. Press B to reset chronograph minute hand. Each press
of B will advance the chronograph minute hand by one
increment or press and hold B for fast advance.
3. Press A to reset chronograph 1/5 second hand. Each
press of B will advance the chronograph 1/5 second
hand by one increment or press and hold B for fast
advance.
Chronograph a
Time SeTTing
1. Pull crown out to position 3.
2. Turn crown to set the desired time.
3. Return crown to position 1.
daTe SeTTing
1. Pull crown out to position 2.
2. Turn crown counter-clockwise until the
correct date is shown in the date window.
3. Return crown to position 1.
Chronograph operaTion
1. Press A to start/stop the chronograph.
2. Press B for reset
.
adJUSTing The Chronograph
1. Pull crown to position 3.
2. Press A to reset the second hand to “0.”
3. Press B to reset the chronograph minute and hour hands.
4. Reset the watch to the current time and return crown to
position 1.
day/daTe WaTCh
daTe SeTTing
1. Pull the crown out to position 2.
2. Turn clockwise and set the date for the previous day.
day SeTTing
With crown still in position 2, turn counter-clockwise and
set the day for the previous day.
Time SeTTing
1. Pull crown out to setting 3.
2. Turn counter-clockwise to advance the time and continue
until the day/date changes to the present day.
3. Set the correct time.
4. Push crown back to position 1.
daTe WaTCh
daTe SeTTing
1. Pull the crown out to position 2.
2. Turn counter-clockwise and set the date for the
previous day.
Time SeTTing
1. Pull crown out to setting 3.
2. Turn counter-clockwise to advance the time and continue
until the day/date changes to the present day.
3. Set the correct time.
4. Push crown back to position 1.
Chronograph C
Time and daTe SeTTing
1. Before setting the time, make sure the
chronograph is stopped and set to zero
(12:00) position.
2. Pull crown out to position 2.
3. Turn crown clockwise until the previous day’s
date is displayed.
4. Pull crown out to position 3 when the second
hand is at the 12:00 position.
5. Turn crown to set time.
Note: 24-hour hand moves correspondingly with
the hour and minute hands. When setting the time
be sure to check that the 24-hour hand is set properly.
6. Return crown to position 1.
Note: When the crown is in position 2, do not press the
pushers. otherwise the chronograph hands will move.
Chronograph
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
SpliT Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
Chronograph zero reSeT
1. If either of the chronograph hands is not at the zero
(12:00) position, pull crown out to position 3.
2. Press A to move hands clockwise; press B to move
hands counter-clockwise.
3. Return crown to position 1.
