manualshive.com logo in svg

DIEBOLD NIXDORF DN Series K32, Руководство оператора

Поделиться
Скачать
DIEBOLD NIXDORF DN Series K32 Скачать руководство пользователя страница 5

Introduction

1.4

1.4

Special notice

Operation personnel:

This refers in particular to the personnel who can normally
operate and use the product but cannot open product cabi-
net, including the customer, interpreter, etc.

Repairing personnel:

This refers in particular to the personnel who can change
product parts, overhaul the device, and open product cabi-
net but cannot change device parts with different type with-
out permission, so as to avoid the danger. The repairing
personnel must receive systematic training provided by
manufacturer.

WARNING

This is Grade A product. This product may cause the radio jamming in the living environ-
ment. In this case, it is necessary for user to adopt some practical measures against its in-
terference.

1.5

1.5

Warning indication

The warning proposed for the product shall be emphasized and followed, and the user
shall be responsible for the parts or device damage and derived disaster due to the fact
that the operation, maintenance and repairing are performed without reading the Manual
or in compliance with the requirements specified in the Manual.

The warning items must be strictly followed so as to avoid the injury to the user.

•

The product is only applied to the area with less than 2,000m elevation for safety operation.

•

The product is only applied to the area with non-tropical climate for safety operation.

•

Please adopt the power supply meeting specification requirement. The power supply which does not
meet specification requirement in connection may lead to product damage.

Copyright © 2019, Diebold Nixdorf
01750337356B

1-2

Содержание DN Series K32




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды