Operation
4.3
4.3
Accessing the Safe
There are many types of safe locks available for this system. The types of locks discussed in this manual
are the most commonly used among our customers.
Mechanical Combination Lock
This lock requires a combination to be entered manually through the lock dial. When the code is suc-
cessfully entered, the lock dial is turned to the right to release the lock bolt. Then the handle can be
turned to open the safe.
Mechanical Keylock
A removable key may be used to unlock the safe door lock bolt. Then the handle is turned to open the
safe door. A mechanical keylock can also be used before entering the combination for the combination
lock.
Safe Opening Handle
Safe opening handles are present with single mechanical combination locks and with electronic combi-
nation locks. Safe opening handles are used to release the safe door after you enter the correct combi-
nation on the mechanical combination lock or electronic combination lock keypad.
4.3.1
4.3.1
Opening the Safe Door Cover
Perform the following procedure to open the safe door cover and access the safe door and system mod-
ules within the safe. Refer to
.
1.
Insert the safe door cover key into the lock located on the left side near the top of the safe door
cover.
2.
Turn the key counterclockwise to unlock the safe door cover.
3.
Open the safe door cover.
4.
Refer to
5.
Refer to
to place the system in the proper mode for maintenance.
6.
Refer to the appropriate section in this manual to access the desired component.
7.
Refer to the appropriate operating manual listed in
for information on completing the
maintenance procedures for your system's modules.
Copyright © 2021, Diebold Nixdorf
01750337284 C
4-8