Operation
4.8
4.8
Emptying the card box (removable)
4.8.1
4.8.1
Removing the card box
1.
Activate the product-specific software (see chapter "Operation").
2.
Open the DN Series 250 and gain access to the card box (see chapter "Description").
NOTE
Note that the card box cannot be pushed back into the mounting fixture if the card inser-
tion slot is closed by the lock mechanism. In this case, no ID cards can be transported to
the card box and the system may shut down. Before the card box is pushed in, it must be
opened and closed again (see sections "Opening the card box" and "Closing the card
box").
2
1
TD-01576-01
Figure 4-20:
Pulling out the removable card box
3.
Pull the card box (1) from its mount (2) in the
direction of the arrow.
Copyright © 2021, Diebold Nixdorf
01750340329 E
4-37
