DIEBOLD NIXDORF CINEO C4060, Инструкция по установке и эксплуатации

Страница: 9 / 72

Safety
01750308102 A CINEO C4060 (RM4H) - Supplementary Instruction 9
2.2 General safety precautions
This device complies with the relevant safety regulations for information
processing equipment.
– For reasons of stability, the device must be screwed to the load-bearing
substructure of the installation site or mounted on a suitable base.
– When moving the device from a cold to a warm environment, do not
operate it for at least two hours to prevent possible damage caused by
condensation. do not operate it for at least two hours to prevent possi-
ble damage caused by condensation.
– Use only the original packaging material to transport the device.
– Observe the warning and information labels on the device.
– Unless otherwise stated, grasp the components only by the green ledge
when handling them.
– The device is equipped with a safety-tested power cable. Connect this
power cable only to a grounded socket.
– Always hold the plug when removing the power cable. Never pull on
the cable itself.
– Lay all connecting cables in such a way that they will not be stepped on
or tripped over, damaged or crushed in any way.
– Have damaged power cables replaced immediately.
– Make sure that there is always free access to the electrical sockets
used or to the electrical circuit-breakers of the house installation.